ONE TOUCH HANDLING
When it comes to placing the right amount of material at the correct grade and slope in one pass, whether on a shoulder or elsewhere, the best equipment for the job is a Weiler road widener.
MATERIAL DELIVERY
A 3.2 yd³ (2.4 m³) hopper means fewer truck exchanges during the workday. The 24” (610 mm) wide belt and maximum 400 fpm (121 mpm) belt speed provide quick placement of materials to either the right or left side of the machine.
PRECISE STRIKE-OFF
25” (635 mm) tall strike-off tools widen from 1’ (.3 m) to 8’ (2.4 m) and are capable of placing material up to 12” (305 mm) above and below grade. Multiple tool sizes plus hydraulically adjustable tools ensure precise strike-off and can be set to exact grade and slope specifications.
RELIABLE POWERTRAIN
A Cat® C2.8 Tier 4F/Stage V engine with 74 hp (55 kW) powers the front wheel hydrostatic drive with 2-speed motor and 2-speed transmission for 274 fpm (83 mpm) working speed and 11 mph (17.1 km/hr) transport speed.
VISIBILITY AND CONTROL
All controls are located on a single panel within easy reach of the operator. The operator is located back from the dump hopper and toward the outer edge of the machine for increased visibility.
FAST SERVICE
Self cleaning pulleys minimize material build-up and large doors enable easy access to engine and machine components. Caterpillar dealer service and support keep your machine up and running with limited down time.
- Weight: 19,500 lbs (8,845 kg)
- Length: 19′ (5,791 mm)
- Operating Width: 10′ (3,048 mm)
- Transport Width: 10′ (3,048 mm)
- Height: 7′ 11″ (2,441 mm)
- Wheel Base: 117″ (2,971 mm)
- Hopper Capacity: 3.24 yd (2.48m)
- Conveyor Length: 10′ (3,048 mm)
- Conveyor Width: 24″ (610 mm)
- Belt Speed: 400 fpm (121 mpm)
- Max Working Speed: 274 fpm (83 mpm)
- Transport Speed: 11 mph (17.1 km/hr)
- Engine: Cat® C2.8 Tier 4F/Stage V
- Horsepower: 74 hp (55 kW)
- Turning Radius: 13′ (3.9 m)
- Rear Steer Turn Radius: 8′ (2.3 m)
- Fuel Capacity: 64 gal (242 L)
- Hydraulic Capacity: 52 gal (196 L)



